Insert valves

VUBA-DIN Safety valve for hoses DIN housing

In stock

Hose burst valve wit automatic load lock for DIN hoses

Conceived with the aim of avoid additional externa housings, the hose burst valves VUBA-DIN offer the advantage of reduced dimensions and simplicity in installation. They can be directly installed on the base of an hydraulic cylinder, while the hose can be applied on the valve without any other components needed. The safety valves VUBA-DIN avoid an uncontrolled lowering of the load in event of breaking of the hose.



The hose burst valves VUBA in the normal operating allow the flow in both directions without influencing the regular functinality of the hydrulic system. In event of breaking of the hose, the plate joins the body and the valve close the outlet flow from the cylinder, locking the load in its position. Safety valves VUBA must be set by regulating the opening thickness “F” (see technical data sheet of the valve). It is recommended a setting correspondant to a flow 50% over the maximum of the system. The setting can be done in our plant or directly by the Customer. As optional, a calibrated orifice on the plate allows the slow lowering of the load when the valve is closed. Components of the safety valve VUBA-DIN are protected against corrosion with surface treatment zinc plating.