Insert valves

VCC140 Flow control pressure compensated valve, unidirectional, fixed version

In stock

Compensated flow restrictor two ways with constant flow and reverse free flow, fixed version

Flow control pressure compensated valves with fixed regulation VCC140 allow to keep a constant lowering speed on an hydraulic actuator in every condition of load pressure. This type of valve is typical for use in hydraulic tail lifts or platforms.



Insert compensated valves VCC140 are usually installed on back lines of single effect cylinders in order to guarantee them, thanks to the control of back-flow, a constant lowering speed independently from the working pressure due to the load. These valves allow also the feeding flow to the cylinders without compensation. Valves VCC140 have fixed setting regarding the regulated flow. Setting range is from 1 lpm (0,26 USgpm) to 12 lpm (3,2 USgpm), with tolerance +/- 10% and setting gaps 1 lpm (0,26 USgpm). The choice of the setting in according with the wanted lowering speed of the actuator. Maximum working pressure not over 250 bar (3625 PSI). VCC140 are installed into female cavity with thread 1/4 BSPP (1/4 G). Flow control valves VCC140, thanks to their high performance combined with its simplicity in construction, guarantee a high quality/price ratio. Thanks to the fixed regulation, once determined the ideal flow corresponding to the lowering speed, the valves VCC140 don’t need any setting operation more, with a consequent optimization in terms of installation time.