Thanks to the IDF SAE rotary flow diverters it is possible to manage the oil flow in an hydraulic circuit with the possibility of reversing inlet and outlet directions. IDF8 - 8 ways diverters - can manage two actuators simultaneously with a single lever control. The flow direction is switched by moving the lever to the two extreme positions. Spools are available with open center and closed center in neutral position. The IDF8-SAE deviators are available in sizes from SAE8 (thread 3/4 -16 UNF) to SAE16 (1-5 / 16-12 UN). The flow rate and the maximum working pressure, in relation to the chosen size, are respectively up to 200 lpm (52,8 gpm) per stage and 350 bar (5075 PSI). The diverter body is made of cast iron; black paint ensures protection against corrosive agents. For internal components high strength, hardened and ground steel is used.