The CUR10 is a cartridge unidirectional valve sized for standard cavity SAE10/2 (thread 7/8-14 UNF). Flow is allowed from port 1 to port 2 while it is interrupted in the opposite way. The valve CUR10 is available with poppet sealing. Opening pressure is fixed at 1 bar (14,5 PSI) Thanks to the cartridge sized to be fitted into standard cavity SAE10/2, the valve can be easy installed into the most common HIC’s manifolds. The maximum working pressure for the valve CUR10 is 350 bar (5075 PSI), while maximum recommended flow rate is 40 lpm (10,5 USgpm). The poppet, built with high resistance steel, hardened and grinded, grants the sealing for the valve CUR10 thanks to the perfect accordance with the cartridge. External components, also built with high resistance steel, are protetcted against the corrosive agents by zinc platng treatment.